Tutorial: an original concrete candle holder

Tutorial: an original concrete candle holder

We are searching data for your request:

Forums and discussions:
Manuals and reference books:
Data from registers:
Wait the end of the search in all databases.
Upon completion, a link will appear to access the found materials.

With more than 60 billion units used each year in Europe, cans are one of those objects whose shape is recognizable by all. Besides, did you know that from the top of its 21 grams, an aluminum can can support an axial mass of 100 kilos? But we deviate from the subject since it is their form that we will focus on in this tutorial. Today we will learn how to make a concrete candle holder with a can of soda.


- a bag of quick-setting mortar or cement - a trowel - a cutter - two tealights - an empty aluminum can - a roll of scotch tape - a tarpaulin - a container for mixing Budget: around 20 € Duration: 1 hour (not including concrete drying time


1. Start by delicately cutting the top of the can with a craft knife. Be careful because aluminum is very sharp. This cut can will serve as a formwork.
2. Prepare the mortar mixture. Take care to respect the dosage and not to add too much water (even if you have the impression that it is lacking at the beginning). Indeed, the mixture becomes more and more liquid by dint of mixing.
3. Pour the mortar into the can. Once the can is full, tape two tealights to each other and position them in the center of the can by pushing them well into the mortar. Then place a flat element on top with a weight for the duration of the drying.
4. Once the mortar is completely dry, remove from the mold by delicately cutting the sides of the can. Be careful not to touch the mortar with the cutter, otherwise there will be traces.
5. Lightly sand the candle holder with a very fine grain if necessary. Depending on the desired final effect, you can apply a layer of special cement varnish to give a polished concrete look.


To make larger objects, it is preferable to reinforce the concrete in order to solidify it. What if you made a stool the next time?
Did you like this tutorial? Send us photos of your version of this DIY on our Facebook page, and find other ideas on our Pinterest!